Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Windows & Doors Across Santa Monica
Windows and doors in Santa Monica fail on their own schedule. If you own a unit in one of the newer condo towers near Ocean Avenue or an infill build off Pico, the original builder-grade aluminum sliders and patio doors are usually the first things to go: fogged glass, sticky tracks, hinges that pit within a few summers of salt air. We work with independent local installers who know this building stock, know the HOA and coastal approval stack that comes with it, and know how to replace a window or door without voiding a builder warranty. Call (833) 954-6131 to schedule a free estimate. We answer 24/7.
Why Santa Monica Homeowners Call Construction Burbank for Windows & Doors
Santa Monica is its own permitting world. Residential projects here sit inside the jurisdiction of the California Coastal Commission and the city’s Coastal Land Use Plan, so changes to an opening on a coastal-zone property can trigger coastal development review layered on top of standard city permitting. That extra layer doesn’t exist a few miles inland in Culver City or West LA, and it reshapes what you can install, where, and how the paperwork gets filed. Our installers read the project through that lens before anyone touches a frame.
We help you choose the right material, not just any material. That matters more in Santa Monica than most places because the marine layer, salt-laden onshore wind, and winter rain attack fasteners, flashing, rollers, and weather barriers long before the glass itself gives out. Specifying marine-grade hardware and corrosion-resistant flashing isn’t optional here; it’s the difference between a door that slides smoothly and one that seizes at the track in three years.
The housing stock splits the work in two. Pico and Ocean Park are dense with 1920s-40s Spanish Colonial and Craftsman bungalows and duplexes, where openings are often out of square and rough openings need real attention. The newer towers and infill developments are the opposite problem: standardized openings, builder-grade finishes, and HOA rules that dictate exactly what profile and color can replace what’s there.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Windows & Doors Services in Santa Monica
Window Replacement
Replacement is what most Santa Monica owners actually need, whether that’s a fogged sealed unit in a mid-century apartment conversion or an entire elevation of failing vinyl in a newer tower. Because so many of these buildings are HOA-governed, the replacement unit usually has to match an approved exterior color and profile before a permit is even filed. We work through that sequence with you so the unit you order is the unit that gets approved.
Sliding & Patio Doors
Patio doors take the worst of it. Salt-laden coastal air and marine-layer humidity pit and seize builder-grade aluminum rollers and tracks long before the glass fails, and a door that won’t slide is usually a hardware-and-track problem, not a glass one. When the frame itself is corroded past saving, a full replacement with corrosion-resistant hardware is the right call.
Energy-Efficient Windows
Builder-grade aluminum and low-tier vinyl units with a poor U-factor are the norm in the newer condo towers, and they’re a real heat and cooling drag through a Santa Monica summer. Upgrading to a better-performing unit is straightforward, but in an HOA building the exterior color and profile still have to clear approval first. We help you balance performance against what your building will actually sign off on.
Impact Windows & Doors
Impact-rated lines from PGT, CGI, and ECO Window Systems are worth considering where a property faces onshore wind and driven winter rain, or where an HOA already has an approved impact spec on file. The rating isn’t the hard part; matching the profile, color, and U-factor to the building’s approved schedule is. We guide that selection as part of the project, not as an afterthought.
Trusted Brands We Service in Santa Monica
We work with impact-rated and energy-efficient lines from Therma-Tru, ViewLux, PGT, CGI, and ECO Window Systems, and we service existing Mr-Glass installations where a failed sealed unit needs attention. We don’t claim to stock parts or units locally; what we do is help you choose from a real range of manufacturer options so the replacement matches your building’s approval schedule, your budget, and the corrosion realities of coastal air. Fast turnaround matters on a failed slider, and we keep the selection process moving so the install isn’t waiting on a decision.
Common Windows & Doors Problems We See in Santa Monica Homes
- Builder-grade sliders that pit and seize. In the coastal towers and infill developments, aluminum patio door rollers and tracks corrode from salt air and marine humidity long before the glass fails. A door that grinds or sticks is almost always a hardware-and-track issue, not a glazing one.
- Fogged double-pane sealed units. Owners in newer towers often want failing sealed units swapped before the builder warranty lapses. Done right, it’s a clean glass-and-gasket replacement; done wrong, it can void the warranty or breach HOA exterior-color rules.
- Flashing and weather barrier failures. Loose or deteriorated flashing at openings only shows itself in winter rain. That’s when moisture finds its way into the wall cavity and starts rotting framing around the rough-in, which turns a window job into a bigger repair.
- Corroded hinges and exterior hardware. Salt-laden onshore wind works on builder-grade steel and aluminum hardware faster than most owners expect. Marine-grade replacement components make a real difference in how long the door stays operable.
Pricing for Windows & Doors in Santa Monica, CA
Typical window replacement in Santa Monica runs $5,310 – $17,700 depending on the number of openings, the unit’s performance spec, and whether the building’s HOA or coastal review adds steps to the sequence. A single failed sealed unit sits at the low end; a full elevation of impact-rated or energy-efficient units in a tower with an approval packet sits at the high end. Every job is priced per job by a written estimate, so you see line items before work starts. That estimate is free, and the written number sets the final price. The table below gives you the range to plan against.
| Scope | Typical Estimated Range |
|---|---|
| Window Replacement | $5,310 – $17,700 |
What moves you up the range: impact-rated units, energy-efficient glazing packages, non-standard opening sizes in older bungalows, and the approval paperwork that HOA-governed buildings and coastal-zone properties require. What keeps you at the low end: a straightforward swap in a standard opening with a spec that already matches your building’s approved schedule.
See the difference
Before
After
Before
After
Before
AfterWe Also Serve Cities Near Santa Monica
If you’re just outside Santa Monica, we also work with homeowners in Marina del Rey, Culver City, Beverly Hills, and West Hollywood. The coastal review and HOA dynamics differ from Santa Monica’s, but the corrosion and flashing realities are close cousins along this stretch of the coast. Reach out and we’ll talk through your building and your openings. For the broader scope of what we cover across every category, see our Windows & Doors page.
Serving Santa Monica, CA – Our Local Coverage Area
We serve Santa Monica and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Windows & Doors in Santa Monica
It can, if the replacement is done outside the manufacturer’s or builder’s specifications or without the required documentation. The safe path is to confirm the warranty terms and the approved replacement spec before ordering, and to use a qualified installer who documents the work. We read the warranty language with you so the install doesn’t create a gap. Call (833) 954-6131 for an exact quote; estimates are free.
Often yes on both counts, depending on the building and the property’s location in the coastal zone. In HOA-governed buildings the replacement unit typically has to match an approved exterior color and profile, and coastal-zone properties may trigger coastal development review layered on standard city permitting. We help you sequence the HOA packet and the permit so neither step stalls the other. Call (833) 954-6131 to talk through your building.
Salt-laden coastal air and marine-layer humidity attack builder-grade aluminum and steel hardware faster here than inland. The fix is corrosion-resistant replacement hardware and proper sealing at the track and threshold, not repeated cleaning. If the frame is already pitted past saving, a full door replacement with marine-grade components is the right answer. Call (833) 954-6131 for an exact quote; estimates are free.
A typical energy-efficient window replacement project in Santa Monica runs $5,310 – $17,700, depending on the number of openings and the performance spec you select. Impact-rated and higher-performance glazing packages push toward the upper end, while a standard spec that matches your building’s approved schedule sits lower. The written estimate sets the final price. Call (833) 954-6131 for a free estimate.
Fogging between the panes points to a failed sealed unit, which is a product issue, while water intrusion, loose flashing, or rot around the rough-in points to an install or weather-barrier problem. Both can look like the same symptom from inside the room, which is why a site evaluation matters. We check the glazing, the flashing, and the surrounding wall cavity before recommending a fix. Call (833) 954-6131 to schedule your free estimate.
What to Do If Your Santa Monica Windows or Doors Are Failing
Start with the warranty and your HOA packet, not the product catalog. In Santa Monica’s newer towers and infill developments, the sequence is: read the HOA architectural packet, confirm the replacement unit’s profile, color, and U-factor match the approved schedule, file the permit, then re-flash and seal the openings with corrosion-resistant materials so the envelope holds through the winter rain. That order keeps the builder warranty intact and keeps the HOA from rejecting a unit you’ve already ordered.
On the install side, a qualified local installer reads the opening for square and checks the flashing and weather barrier before the new unit goes in. That’s where most winter-rain leaks originate: not the glass, but the seal around the rough-in. The work closes out with an inspection sign-off and a punch list before final payment on the draw schedule, so you know what’s been done and what’s still open.
Our technicians have up to 15 years of experience with the full range of openings these buildings present, from out-of-square rough openings in Pico bungalows to standardized HOA-approved tower units. We work with the industry’s most recognized material brands so you’re selecting from a real range, not a single catalog. For homeowners who want to see how windows and doors fit into a broader property plan, our windows & doors team covers the full scope.
Get a Free Windows & Doors Estimate in Santa Monica
Whether it’s a fogged sealed unit in a tower, a patio door that won’t slide, or a full elevation of builder-grade windows you’re ready to replace before the warranty lapses, the next step is a written estimate. We’ll read your HOA packet, confirm the spec, and price it as a line-item estimate so the final number is the one on the page. Call (833) 954-6131 to schedule your free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed on Saturday. Licensed & insured, with written line-item quotes and a workmanship warranty.
Written by the team at Construction Burbank.