Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Windows & Doors Across Los Angeles
If you’re replacing windows or doors in Los Angeles, the biggest decision isn’t the glass or the color – it’s which spec your block actually needs. A west-facing slider in Mar Vista and a canyon-facing unit in the hills above the 405 look identical on paper and fail very differently. We connect Los Angeles homeowners with independent local professionals who know the difference, work through LADBS permitting, and install to the conditions your building sits in. Our technicians have up to 15 years of experience. Call (833) 954-6131 to schedule your free estimate.
Why Los Angeles Homeowners Call Construction Burbank for Windows & Doors
Windows and doors in Los Angeles are a materials problem before they’re a labor problem. Onshore air off Santa Monica Bay pushes salt into the 90066, 90064 and 90025 corridor; Santa Ana winds bake the inland side and drive wildfire brush-clearance and assembly rules up the hillside lots. One contractor working both zones has to know when to specify stainless or hot-dip hardware with sealed joints and when the job calls for a Class A-rated assembly with ember-resistant framing. That’s the knowledge homeowners are paying for, and it’s what we’re built around.
We’re set up to guide you through product selection across a curated roster of window and door lines, including impact-rated and energy-efficient systems from PGT, CGI, Therma-Tru, ES Windows, ECO Window Systems and ViewLux. Our technicians have up to 15 years of experience, and we write line-item estimates so you can see what each part of the job costs. We work with homeowners in homes of every age and construction type here, from 1920s Spanish Colonial stock to mid-century stucco to soft-story apartments near the condo towers in 90024 and 90025. Estimates are free, and the written quote sets the final price.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Windows & Doors Services in Los Angeles
Window Installation
New window installation in Los Angeles means dealing with what’s behind the plaster. On 1920s to 1940s homes, the rough opening is often out of square and the original framing has absorbed decades of sun-baked stucco movement and drought cracking. We check the rough-in and any load-bearing header before the unit goes in, then flash and back-caulk under the existing stucco so the joint is sealed rather than smeared.
Door Installation
Entry and patio door installation in Los Angeles is where salt-laden air does the most quiet damage. Aluminum slider tracks pit and steel hardware binds on west-facing units, so we specify marine-grade or stainless hardware on those exposures and inland-spec hardware where the wall faces away from the coast. Therma-Tru entry systems are one option we work with when the goal is a door that holds its fit through canyon temperature swings.
Window Replacement
Replacement is the biggest category here, and for good reason: original single-pane steel casements and early aluminum sliders are still hanging in thousands of Los Angeles homes, and they fail seismic and energy expectations. A typical window replacement in Los Angeles runs $5,310 – $17,700, with the written estimate setting the final price. We also confirm the new assembly meets the brush-clearance and wildfire exterior rules before the wall closes.
Impact Windows & Doors
Impact-rated and energy-efficient units make sense on the canyon and hillside lots where the rules are stricter and on any home where noise and security matter. We work with impact lines from PGT, CGI and ViewLux, and we’re honest about when a standard energy-efficient window is the smarter spend. If you want to see how the full category fits together, our windows & doors hub covers every product type we work with.
Energy-Efficient and Sliding Doors
Energy-efficient windows cut heat gain on inland-facing walls, and sliding or patio doors are the toughest spec on the coast because the rollers and seals live in the salt. Sealed joints and proper weep holes matter more than the marketing on the sticker.
Trusted Brands We Service in Los Angeles
The brand matters less than the brand matched to the exposure. We work with Mr-Glass, Therma-Tru and ViewLux among others, and we help you choose the right material rather than taking an order. A stainless-hardware coastal unit costs more than the inland version of the same window, but it’s the one that still slides after a decade of onshore air. Turnaround depends on the line and the lead time, and your written estimate lays out exactly which unit is quoted. We don’t stock parts – everything is ordered to your job.
Common Windows & Doors Problems We See in Los Angeles Homes
- Pitted aluminum and seized rollers. Salt-laden onshore air pits slider tracks and steel casement hardware on west-facing units, so windows bind and seals tear within a few years. Lubricant doesn’t fix pitted metal.
- Cracked stucco around openings. Decades of sun-baked stucco and drought crack the wall around window and door openings, letting Santa Ana-driven wind push water past unsealed joints into the rough-in and subfloor.
- Original wood frames and single-pane glass. The 1920s – 40s wood frames and single-pane glass common in 90016, 90035 and 90056 fail seismic and energy expectations, and they’re the first thing a buyer’s inspector flags.
- Vinyl flange cracking on canyon lots. Cheap vinyl replacements crack at the flange under the wide temperature swings on Westside canyon lots, and once the flange fails the water gets behind the stucco.
See the difference
Before
After
Before
After
Before
AfterThe Coastal-Spec vs. Inland-Spec Split in Los Angeles
This is the part most estimates skip. Los Angeles combines a marine-salt-influenced coastal air mass with inland Santa Ana wind heat and wildfire brush-clearance rules, so the same window or door job needs two different specs. West of the 405 you want stainless or hot-dip hardware and sealed joints because the air eats aluminum and steel fast. Up the canyon and hillside lots you want Class A-rated assemblies and ember-resistant frames because the exterior rules and fire exposure demand it. Getting this backward is expensive. A homeowner who installs inland-spec hardware on a west-facing wall in the 90066 corridor is replacing seized rollers again in a few years, and that second job usually costs more than the coastal spec would have upfront.
Here’s how the typical job usually goes. On mid-century stucco tract homes and 1920s Spanish Colonial stock across the covered ZIPs, the common failure is a west- or ocean-facing aluminum slider or single-pane steel casement where salt-laden air has pitted the hardware, the weep holes are clogged with stucco patch, and the sill has rotted the rough opening framing behind the plaster. A qualified local pro removes the unit, checks the rough-in and any load-bearing header, replaces soft framing, then resets with a marine-grade or stainless-hardware unit, back-caulked and flashed under the existing stucco so the joint is sealed rather than smeared. Where the wall opens on a hillside or canyon lot, they also confirm the new assembly meets the brush-clearance and wildfire exterior rules and pull permits before the wall closes. Hillside grading and retaining-wall drainage come into it too – on the steep canyon lots, a blocked footing drain is the difference between passing LADBS and a red tag.
Pricing for Windows & Doors in Los Angeles, CA
Pricing here is set per job by the written estimate, and the exposure drives most of the range. Coastal-spec units with stainless or hot-dip hardware and sealed joints cost more than inland-spec equivalents; canyon lots with hillside permits and brush-clearance review add more steps. Here’s what to expect.
| Job | Typical Estimated Range in Los Angeles |
|---|---|
| Window Replacement | $5,310 – $17,700 |
| Impact Garage Doors | $9,440 – $23,600 |
Your written estimate is itemized line by line, so you can see what each unit, hardware spec and framing repair costs. Estimates are free.
We Also Serve Cities Near Los Angeles
Homeowners just outside the city call us too. We take inquiries for View Park-Windsor Hills, West Hollywood, Culver City and Beverly Hills, and the same coastal-spec reasoning applies along those blocks. If you’re not sure whether your address is coastal-spec or inland-spec, we’ll tell you on the estimate. Call (833) 954-6131 to schedule.
Serving Los Angeles, CA – Our Local Coverage Area
We serve Los Angeles and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Windows & Doors in Los Angeles
Because lubricant can’t undo pitting, and salt-laden onshore air pits aluminum slider tracks and steel rollers on west-facing units. The rollers are the symptom, not the cause. Once the metal is pitted the door binds no matter how often you grease it, and the fix is a unit with marine-grade or stainless hardware and sealed joints. Call (833) 954-6131 for an exact quote – estimates are free.
Often yes. Canyon and hillside lots can fall under hillside grading, brush-clearance and wildfire exterior rules layered on top of a standard LADBS window permit. That’s why we confirm the assembly and the permit path before the wall closes. Call (833) 954-6131 and we’ll walk you through what your address triggers.
Coastal-spec means stainless or hot-dip hardware and sealed joints built for salt-laden onshore air; inland-spec uses standard hardware suited to the drier, hotter inland side. The coastal version costs more because the hardware and finishing are a step up, and it lasts years longer on a west-facing wall. Call (833) 954-6131 for a written quote on either spec – estimates are free.
In most cases, yes. A qualified local pro can pull the units, check the rough-in and header, replace any soft framing behind the plaster, and reset new units flashed under the existing stucco. Full gutting is usually only needed where the sill or framing has rotted past the point of repair. Call (833) 954-6131 to schedule a free estimate.
It should list each unit by line, name the hardware spec, and separate framing repair, flashing, permits and disposal so nothing hides in a lump sum. Ours are written that way, and the written estimate sets the final price. Call (833) 954-6131 – estimates are free.
Replacing windows or doors in Los Angeles is a decision about which spec your exposure calls for, not just which color frame you like. We help you choose the right material, order it to your job, and install to the conditions your wall actually faces – from the 90025 corridor to the canyon lots above the 405. Our technicians have up to 15 years of experience, we can work with your insurer where coverage applies, and the written estimate sets the price with no change orders. Call (833) 954-6131. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Closed Saturday.
Written by the team at Construction Burbank.