Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Fence Installation for Burbank Homeowners
A fence should still stand straight a decade from now, and in Burbank it usually starts with what happens below grade. Our technicians have up to 15 years of experience setting posts in this valley’s hard, sun-baked soil, where a hole that looks fine in spring can let a post lean by the second summer. We install wood, vinyl, aluminum, chain link, and iron fencing, and we repair what’s already there. Free estimates come with written line-item quotes, so you see the post spacing, footing depth, and material grade before anyone digs. Call (833) 954-6131. We answer 24/7, with fast dispatch from 7am to 7pm.

What Our Fence Installation Service Includes
Every fence we install is built around the same three questions: what’s it keeping in, what’s it keeping out, and how much wind and sun will it take. The answers decide the material, the post spacing, and the footing.
Wood Fence
Wood fencing is the classic choice for Burbank backyards, and it’s the most repairable option when a single board or post fails. It suits privacy along a property line and older homes where a natural finish fits the architecture. We set wood posts in concrete footings sized to the fence height and local wind exposure, then space boards for airflow so the wood can move through the dry season without cupping.
Chain Link Fence
Chain link is the practical answer for a side yard, a dog run, or a pool enclosure that needs to be secure without blocking light. It’s the most economical fence per linear foot and holds up well to sun. We set galvanized posts to a consistent line and tension the fabric so gates swing clean and the top rail doesn’t sag over time.
Vinyl Fence
Vinyl fencing gives you a privacy wall that never needs staining or sealing, which matters in a climate with as much sun as Burbank gets. It’s a good pick for a pool area or a clean-lined backyard. We work with Bufftech vinyl systems and set the posts deep enough that the panels stay plumb through the heat.
Aluminum Fence
Aluminum fencing delivers the look of wrought iron without the rust, and it’s the go-to for front yards, pool barriers, and anywhere you want security with an open view. It’s lighter than steel, which makes it easier on gates and hinges. We install Ameristar aluminum systems and rack the panels to follow a slope so the top line stays true on a hillside lot.
Iron Fence
Iron fencing gives a property a settled, traditional presence and is often specified where a neighborhood or historic character calls for it. It’s heavy and durable, and it takes a finish that holds up to weather. We install Jerith ornamental systems and check that every post is anchored into a footing that can carry the weight and resist wind load at the gate.
Fence Repair
Not every fence problem means a new fence. A leaning post, a sagging gate, a split rail, or storm damage can often be repaired at a fraction of replacement cost. We assess the whole run, replace the failed sections and their footings, and match the new material to what’s already there so the repair doesn’t stand out.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Fence Installation
We work with systems from Master Halco and Ameristar, and knowing how each one is engineered changes how we set it. Master Halco puts out a wide range of fence and gate hardware, and we match the post and rail spec to the wind and soil at your property line. Ameristar aluminum has a specific panel and post connection, and getting that racked correctly on a slope is the difference between a fence that looks right and one that fights its gate every time.
We also install Bufftech vinyl and Jerith ornamental iron, and each brand has its own footing and spacing requirements to perform long-term. Whether you have one of these systems already or want to start fresh with any other make, we can help you choose the right material, not just any material.
Signs You Need Fence Installation Right Now
- Posts leaning after the dry season. When several posts tilt the same way, the footings have likely lost their grip in soil that has dried and shrunk. Left alone, the whole run keeps moving and repairs get more expensive.
- Gates that drag or won’t latch. A gate that catches on the ground or won’t close is usually telling you the posts have shifted or the hinges have worn. It’s a security gap and a sign the frame needs attention.
- Boards or panels cracking and splitting. Sun and age cause wood to check and vinyl to crack. Widespread splitting means the material is past its service life and patching won’t keep up.
- Rust or corrosion on metal fencing. Surface rust on iron or steel spreads quickly once moisture gets into joints. Catching it early can mean refinishing rather than replacing, but failing sections need to come out.
- A fence that’s short of the property line or a needed height. If you’re adding a pool, a dog, or a new setback, the existing fence may not meet what you now need. Rebuilding to the correct line and height solves it properly.
Our Fence Installation Process – Step by Step
- 1
Walk the line and check the ground. We look at the existing fence, the property boundaries, and what’s underground before anyone quotes a number. A call to the local utility locating service flags buried lines, and we check soil conditions that affect footing depth.
- 2
Choose the material and layout together. We walk you through wood, vinyl, aluminum, chain link, and iron options and match each to how you’ll use the fence and what you want it to look like. The written line-item estimate spells out material, post spacing, and footing spec.
- 3
Pull the permits. Fence height and placement in Burbank can require a permit and must respect property lines. We handle the paperwork and the inspection so the fence is legal and stays yours.
- 4
Set the posts and build the run. Posts go in first, set in concrete and checked for line and plumb, because everything else hangs on them. Then rails, panels, and gates go up, with hinges and latches aligned so they close clean.
- 5
Walk it with you and finish the details. We check every gate, tighten hardware, and clean up the site. You get a final walkthrough so you can see the fence is square, secure, and where it belongs.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fence Installation Cost in Burbank?
Fence pricing in Burbank depends on material, height, linear footage, and how much prep the ground needs. Two typical estimates to keep in mind:

| Fence type | Typical estimated range |
|---|---|
| Vinyl fence installation | $3500 – $9000 |
| Aluminum fence installation | $4000 – $10000 |
Those ranges are estimates, not quotes. The final price is set by your written estimate once we’ve measured the run, checked the soil and slope, and confirmed footing depth. Factors that move the number include total linear footage, gate count and hardware, whether the ground is level or sloped, and permit requirements. To avoid overpaying, get a line-item quote that separates material, labor, and footings, and be wary of a flat per-foot price that ignores site conditions.
A free estimate from us includes measurement, a material recommendation, and a written quote with no change orders once you sign. For the larger picture of how a fence fits with driveways, additions, and other work, see Construction Burbank.
Fence Installation Near Burbank – Our Service Area
We install fencing throughout Burbank and the surrounding neighborhoods, and we also work in San Fernando, West Hollywood, and Beverly Hills. Response times depend on the size of the job and site access, but estimates are scheduled quickly and crews are dispatched from 7am to 7pm, Sunday through Friday. If you’re comparing options nearby, our fence installation and fence installation pages cover the same materials and standards.
Serving Burbank, CA – Our Local Coverage Area
We serve Burbank and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fence Installation in Burbank
Fence installation is the process of setting posts in footings and building a fence run – wood, vinyl, aluminum, chain link, or iron – along a property line, pool edge, or yard boundary. It includes layout, footing work, panels or rails, and gates. We handle the whole job, from material selection to permits to the final walkthrough. Call (833) 954-6131 for a free estimate.
Most residential fence runs take a few days from post-setting to finished gates, with larger or sloped properties taking longer. Timing depends on linear footage, material, and how many gates you need. We give you a realistic schedule in the written estimate so you know what to expect. Call (833) 954-6131 to book an estimate.
Typical estimated ranges are $3500 – $9000 for vinyl and $4000 – $10000 for aluminum, depending on footage, height, slope, and gates. The written estimate sets the final price, and it’s itemized so you can see material, labor, and footings. Call (833) 954-6131 for an exact quote – estimates are free.
Yes, we install and repair Ameristar aluminum and Bufftech vinyl systems along with Master Halco and Jerith components. We know how each brand’s posts, panels, and gates are meant to go together. Whether you have one of those systems or any other make, we can help you choose or repair it. Call (833) 954-6131 to talk through your fence.
Same-day service is available for many repairs and small installs when the schedule allows. We answer the phones 24/7, and crews are dispatched from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (833) 954-6131.
Workmanship is covered by our written terms, and material warranties come from the manufacturer for brands like Ameristar and Bufftech. What’s covered depends on the specific product, so we spell it out in your estimate. We stand behind the install and set the fence to last. Call (833) 954-6131 to review warranty details with us.
Clear the fence line of furniture, plants, and debris, and make sure we can reach your property and gate area. Mark anything you want to keep, and let us know about buried irrigation or lines. We check underground utilities before digging, but your input helps. Call (833) 954-6131 to schedule your estimate.
Schedule Your Fence Installation Service in Burbank Today
A solid fence starts with a clear plan and a fair price. We install wood, vinyl, aluminum, chain link, and iron fencing with written line-item quotes, permits pulled, and a final walkthrough. Estimates are free and there’s no obligation. Call (833) 954-6131. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Burbank.