Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Burbank Homeowners Choose Therma-Tru Construction
We provide independent Therma-Tru service and installation in Burbank, from entry door replacement to threshold, sill, and weatherseal repair on doors that are already in place. What sets our Therma-Tru work apart is that we treat these doors as their own product family, not as a generic slab swap: we know how Fiber-Classic, Smooth-Star, Classic-Craft, and Benchmark doors behave in Burbank’s sun and rain, and we fix or replace based on what the door is actually doing. Construction Burbank is not affiliated with, sponsored by, or authorized by Therma-Tru, and we do not claim to be. We’re an independent contractor that repairs, installs, and services Therma-Tru doors with quality parts that fit them. Call (833) 954-6131 for a free estimate.
Why Trust Construction Burbank for Your Therma-Tru Construction?
Our technicians have up to 15 years of experience, and a good share of that time goes into exterior door work on Burbank’s older single-family housing stock. Burbank is a company town for entertainment construction, and the local building culture runs on precision: sets have to be square, openings have to close clean, and nobody wants a callback after the shoot wraps. Residential entry doors get the same standard from us.
Therma-Tru doors have specific weak points, and we know where to look for them. We understand how an adjustable sill cap seats against a door bottom, how factory-painted finishes age on a west-facing entry, and how a lockset prep that was milled slightly off can let water track behind brickmold for years before anyone sees the damage. That’s the difference between a repair that holds and one that gets redone.
We also work warranty-safe. We don’t cut into a slab or alter a door in ways that would compromise a manufacturer warranty, and when a component is covered by a manufacturer program we tell you that up front instead of quietly billing for it. What we won’t do is pretend to be something we’re not. We’re an independent provider, and we say so.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Therma-Tru Construction Problems We Fix in Burbank
Burbank’s east San Fernando Valley climate is hard on exterior doors in a particular way: summer heat that pushes past 100°F, dry Santa Ana wind in fall, then winter rain driven sideways into west- and south-facing entries. That combination produces a predictable set of failures on Therma-Tru products. These are the five we see most.
- Fiber-Classic slab blistering and grain-line cracking. After years of direct sun on a west- or south-facing Burbank entry, the door skin can develop visible blistering or hairline cracks along the molded grain. It’s a sun-exposure story, not an installation defect, and it usually shows up on the hottest face of the house first.
- Smooth-Star finish chalking, peeling, or blistering at the bottom rail. Factory-painted Smooth-Star doors are vulnerable where sprinkler spray and splashback keep the bottom rail wet. The finish breaks down at the lowest six inches long before the rest of the door shows anything.
- Classic-Craft sill cap warp and weatherstripping failure. The adjustable sill system depends on the weatherstripping staying pliable and the sill cap staying flat. When either goes, you get drafts and water intrusion right at the threshold, which is exactly where it’s hardest to see.
- Benchmark water wicking behind the brickmold. On some Benchmark sets, the lockset prep, hinge reinforcement, and sidelite fit allow water to work its way behind the brickmold. The visible door looks fine while the rough opening framing behind it starts to rot.
- Threshold leaks that read as “the door is fine.” A common Burbank scenario: a draft and water staining appear at a west-facing entry, often a Fiber-Classic or Smooth-Star slab with an adjustable sill. The usual cause is a worn sill cap, compressed weatherstripping, or a failed door bottom gasket letting wind-driven rain reach the threshold and framing. A qualified installer re-squares the opening, replaces the sill and weatherseal components, and checks the brickmold and subfloor for moisture before the slab goes back in.
Therma-Tru Parts & Our Repair-vs-Replace Approach
We use OEM Therma-Tru replacement sills, weatherstripping, and hinge and lock prep hardware where the opening and the door model call for it. When a component has been discontinued, we turn to quality aftermarket parts that fit the same opening and function, and we tell you clearly which is which before we order anything. We don’t stock or warehouse parts, and we’re not a Therma-Tru dealer; we source what the specific door needs.
Repair versus replacement comes down to the slab. If the skin is split, delaminating, or showing structural grain cracks, replacing the door or the slab is usually the honest answer, because a cosmetic patch over a failing skin won’t survive another Burbank summer. If the slab is sound and the problem is sill, seal, or hardware, repair is the right call and it’s far cheaper. We put that judgment in the written estimate so you can see the reasoning, not just the number. Call (833) 954-6131 to set up a free estimate.
Our Therma-Tru Service Process – Step by Step
- 1
Diagnosis. We start at the threshold and work up: sill cap flatness, weatherstripping compression, door bottom gasket condition, hinge and lock prep alignment, and moisture readings at the brickmold and subfloor. On Burbank’s older housing, we also check whether the rough opening is square, since an out-of-square frame is what kills sill seals over time.
- 2
Repair or installation. We re-square the opening where needed, replace sill and weatherseal components with parts matched to the door model, and set or rehang the slab true. On new installs, the door is set level and plumb with proper flashing and a sill pan so water has somewhere to go.
- 3
Test. The door gets operated through its full swing, checked for latch engagement, and inspected for daylight at the perimeter. We hose-test the threshold on new installations and on any repair that involved water intrusion, because a door that leaks in a Burbank winter rain is a failed job.
- 4
Warranty and handoff. We leave you with the parts documentation and explain which components fall under a manufacturer program and which are on our workmanship side. We don’t extend or invent warranty terms beyond what a specific manufacturer program actually provides.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Products We Service & Install in Burbank
We handle entry door replacement and entry-door repair on the Therma-Tru product families most often found on Burbank homes: Fiber-Classic doors, Smooth-Star doors, Classic-Craft entry systems, and Benchmark door sets with sidelites. That covers the slab, the frame, the adjustable sill, the weatherseal, the lockset and hinge hardware, and the brickmold interface where water intrusion usually starts. We service doors already in place and install new ones, and we match the door to your actual entry conditions, sun exposure, and existing trim rather than pushing whatever is easiest to source. Burbank’s Spanish Colonial and craftsman bungalows often need the door to sit right in an older, slightly irregular opening, and that’s a fit problem we take seriously.
We Also Service These Brands
Therma-Tru is one part of what we handle. We also work with KraftMaid cabinetry, Cambria and Silestone surfaces, and Kohler fixtures, and those brand relationships let us guide a whole-house scope from the driveway to the roofline under one contractor. If your project pairs a new entry door with a kitchen or bath refresh, you’re not managing three trades. You’re managing one conversation.
FAQs – Therma-Tru Construction Service in Burbank
No. Construction Burbank is an independent service provider and is not affiliated with, authorized by, or sponsored by Therma-Tru. We repair, install, and service Therma-Tru doors with quality parts that fit them, and we say plainly that we’re independent. Call (833) 954-6131 for a free estimate.
Yes. We use OEM Therma-Tru replacement sills, weatherstripping, and hinge and lock prep hardware where the door model and opening call for it, and quality aftermarket parts only when a component has been discontinued. We don’t stock or warehouse parts, and we don’t claim to be a dealer. Call (833) 954-6131 and we’ll walk through what your door needs.
Sill, seal, and weatherstripping repairs are usually a single visit; a full entry door or slab replacement is typically planned work booked around material lead time. Because your entry stays open while we work, we sequence it so the house isn’t exposed overnight. Call (833) 954-6131 to schedule your free estimate and get a realistic timeline in writing.
We service and install Fiber-Classic, Smooth-Star, Classic-Craft, and Benchmark entry doors, including slabs, frames, adjustable sills, weatherseals, hardware, sidelites, and the brickmold interface. We cover both repair of doors already in place and new installations. Call (833) 954-6131 to tell us what you have.
Our work doesn’t void a manufacturer warranty when it’s done correctly, but we’re careful about what we claim: any warranty coverage tied to a Therma-Tru manufacturer program stays with that program’s own terms, and we don’t extend or invent coverage. We do the work in a warranty-safe way and tell you what’s manufacturer-side and what’s ours. Call (833) 954-6131 with questions before we start.
Typical estimated ranges for the Burbank market are below. These are estimates, and the written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Home Addition | $45,000 – $130,000 |
| Roof Repair | $400 – $1,800 |
Prices are per job, set by a free written line-item estimate with no change orders once work begins. Call (833) 954-6131 for an exact quote. Estimates are free.
Book Your Therma-Tru Service in Burbank, CA
Whether it’s a Fiber-Classic slab showing sun damage, a Classic-Craft threshold that leaks in winter rain, or a full entry door replacement on a Magnolia Park bungalow, we’ll diagnose it honestly and give you a written estimate before anything is ordered. Licensed and insured, free estimates, fixed pricing with no change orders. Call (833) 954-6131. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Burbank.