Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Burbank Homeowners Choose PGT Construction
We provide independent PGT construction service in Burbank, CA, repairing, installing, and replacing PGT windows and doors with quality parts that fit them. What sets our PGT work apart is the sequencing: we treat windows, doors, and the roof as one system, so new glazing doesn’t get wrecked by a roof replacement and a roof repair doesn’t leave PGT sill pans exposed to water. Homeowners across Burbank call us because they want a contractor who knows how PGT units actually age in Southern California heat and wind, not a generalist guessing at it.
To be clear about where we stand: Construction Burbank is an independent PGT service provider. We are not affiliated with, authorized by, or sponsored by PGT, and we don’t claim to be. We work with the products every week, diagnose the real-world seal, glass, and hardware failures they develop, and stand behind the work with our own written terms. Our technicians have up to 15 years of experience. Call (833) 954-6131 for a free estimate.
Burbank’s housing stock is part of why this matters. The Magnolia Park and Rancho districts are full of 1920s-1950s Spanish Colonial, Craftsman, and modest ranch bungalows, and many of those windows were swapped for vinyl replacements during past remodels without anyone checking how the new opening met the old stucco and clay-tile details. That is where our window and roof sequencing experience earns its keep.
Why Trust Construction Burbank for Your PGT Construction?
Our technicians have handled PGT vinyl and aluminum units long enough to know which failures are routine and which signal a bigger problem. A fogged insulated glass unit on a south-facing elevation is one thing. A sash that no longer seats because the frame racked after a rear addition is another, and the fix is different. We look at the whole opening, not just the pane.
We use quality parts that fit PGT equipment. When OEM PGT replacement parts like sash balances, rollers, weatherstripping, and glass are available, we use them. When they’re discontinued or the lead time would leave a Burbank homeowner staring at a leaky opening for weeks, we source high-quality aftermarket equivalents that meet the same fit and function. We’re honest with you about which path we’re taking and why.
Warranty-safe service matters here. Manufacturer warranties on windows and doors are frequently voided by careless re-glazing, incompatible sealants, or fasteners driven through a frame instead of a reinforced anchor point. We work in ways that protect the manufacturer coverage you already have, and we tell you when a repair is likely to interact with a warranty claim so you can raise it with the manufacturer before we touch the unit. If you’re weighing a full window replacement against a targeted repair, we’ll put both paths in the same written estimate so you can compare them side by side.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Burbank
PGT units fail in predictable ways in Burbank’s climate. Summer heat regularly pushes past 100°F in the east San Fernando Valley, and the Santa Ana winds bring dry, ember-laden air through the fall. That combination stresses seals, gaskets, glass edge bonds, and hardware faster than a milder climate would. Here are the five we see most.
- Insulated glass unit seal failure and fogging. On older PGT insulated glass units, the perimeter seal can break down, allowing moisture between the panes. South- and west-facing elevations get the most sun exposure, so they fail first. The glass goes cloudy, and eventually the unit loses its insulating value. The fix is a replacement IGU matched to the PGT unit, not a whole new window, if the sash and frame are still sound.
- Sliding door roller wear and track misalignment. PGT vinyl and aluminum patio doors ride on rollers that flatten and groove over years of use. The door sags, drags, and stops sealing at the sill, which is where wind-driven rain gets in. If the rollers are worn but the panel and frame are straight, new rollers and a track adjustment restore the seal. If the panel is bent or the track is distorted, replacement is the honest answer.
- Failed weatherstripping, corner seals, and blocked weep holes. Vinyl windows depend on a continuous weather seal and open weep holes to drain the channel behind the sash. Burbank’s dust and dry-season grit pack into weep holes, and years of sun crack weatherstripping at the corners. Wind-driven rain then finds the gap and shows up as a wet sill or a stain on the drywall below. Clearing the drains and replacing the seals usually solves it.
- Impact-glass delamination and edge seal breakdown on WinGuard® units. PGT WinGuard® laminated glass is built for impact resistance, but the laminated layer and its edge seal do age under years of UV exposure. A cloudy edge, a visible bubble, or a whitish haze along the perimeter is the warning sign. Once the edge bond fails, the impact performance and the clarity both degrade, and the unit needs replacement.
- Hard-to-operate double-hung and single-hung sashes. Vinyl double-hung and single-hung windows develop balance and tilt-latch problems. The sash gets stiff, then sticks halfway. Sometimes the cause is worn hardware; sometimes it’s a frame that moved after a rear addition or a foundation shift. We diagnose which before recommending a repair, because a new balance won’t fix a racked frame.
One scenario runs across all of it. A homeowner notices a cloudy, fogged pane on a PGT Vinyl double-hung window that no longer seals tightly. The usual cause is a failed perimeter seal on the insulated glass unit allowing moisture between the panes. A qualified local pro typically verifies the sash and frame are sound, orders a replacement IGU matched to the PGT unit, and re-glazes the sash with new gaskets and cleared weep holes to restore the seal. That sequence is the whole game with PGT glass.
PGT Parts & Our Repair-vs-Replace Approach
Parts matter as much as technique. We source OEM PGT replacement parts when they’re available and fit the unit in question, and high-quality aftermarket equivalents when OEM is discontinued or the lead time would leave your opening exposed. We don’t stock PGT parts locally, and we don’t claim to. We don’t hold ourselves out as a PGT dealer, and we’re not “sales & service” in any manufacturer sense. We repair, install, and service PGT units with parts that fit them.
The repair-vs-replace call comes down to the unit’s age and the extent of seal or frame damage. A single failed IGU on an otherwise sound sash is almost always a repair. A frame that’s racked, corroded at the corners, or has lost its anchor points is a replacement, because re-glazing a moving frame just kicks the problem down the road. Multi-pane assemblies where two or three units have failed tells us the seal system is at the end of its life, and replacement is often the better spend than piecemeal re-glazing.
We put the numbers in writing before we start, and we don’t change the price once the work begins. Call (833) 954-6131 for a free estimate on your PGT repair or replacement.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We inspect the unit in place. IGU seal, glazing bead, weatherstripping, corner seals, weep holes, hardware, and the frame-to-opening connection. On sliding doors, we check roller condition and track alignment, not just the symptom of a hard-operating door.
- 2
Repair or install. For repair, we order or source the correct replacement parts matched to the PGT unit and re-glaze or re-hang with new gaskets and seals. For install or replacement, we set the unit in a properly flashed opening, with anchor points and sealants that protect the manufacturer warranty and keep water out of the wall assembly.
- 3
Test. We operate every sash, latch, and door through full cycles. We check drainage by wetting the opening and confirming the sill drains. On impact-rated WinGuard® units, we verify the laminated layer and edge seal are intact and the panel seats squarely.
- 4
Written terms. Every job gets a written estimate up front and our workmanship terms on completion. The written estimate is the final price, and any manufacturer warranty coverage stays between you and the manufacturer, which we’re happy to help you document.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Burbank
We service and install PGT’s window and door range in Burbank. That includes PGT WinGuard® Vinyl windows with impact-resistant laminated glass, PGT Vinyl double-hung and single-hung windows, PGT Aluminum Series sliding glass doors, and PGT Vinyl sliding patio doors. Whether you’re re-glazing a failed paned sash, replacing a sliding door that’s dragging its track, or putting in a full set of impact-rated units on a new addition, the work runs through the same process. We don’t claim to stock any of it locally. We do claim to know how these products age in Burbank’s heat and wind, and how to keep them sealing.
We Also Service These Brands
We work across the broader window and door market too, so a PGT owner isn’t locked into a single brand for the rest of the property. That means KraftMaid cabinetry, Cambria and Silestone surfaces, and Kohler fixtures alongside PGT glazing when a remodel touches the kitchen or bath. One contractor, every project phase, from the opening in the wall to the finishes inside it. It’s the same reason homeowners call us for a roof repair as often as a window swap.
FAQs – PGT Construction Service in Burbank
No. Construction Burbank is an independent PGT service provider, not authorized, affiliated, or sponsored by PGT. We work on PGT products as an independent contractor, and any manufacturer warranty claim stays with PGT. Call (833) 954-6131 if you want a straight answer on whether a repair will interact with your manufacturer coverage.
Yes. We use OEM PGT replacement parts like sash balances, rollers, weatherstripping, and glass when they’re available, and high-quality aftermarket equivalents that meet the same fit and function when OEM is discontinued or the lead time isn’t practical. We tell you which you’re getting and why. Call (833) 954-6131 for a free estimate.
Most PGT repairs, like a single IGU re-glaze or a sliding-door roller replacement, are done in a few hours once the replacement part is in hand. Ordering the IGU is often the part that sets the timeline, not the installation itself. Replacement or install work depends on the number of openings and how much flashing and trim is involved. We’ll give you the timeline in writing with the estimate.
We cover PGT WinGuard® Vinyl windows, PGT Vinyl double-hung and single-hung windows, PGT Aluminum Series sliding glass doors, and PGT Vinyl sliding patio doors. That includes re-glazing, hardware repair, roller and track work, seal and weatherstripping replacement, and full replacement into properly flashed openings.
Not if it’s done correctly. We work in ways that protect the manufacturer coverage you already have, using compatible sealants and proper anchor points instead of driving fasteners through a frame. If a repair is likely to affect a warranty claim, we’ll tell you to raise it with PGT before we start. Call (833) 954-6131 to talk it through.
Typical estimated ranges for Burbank are below. These are estimates, and your written estimate sets the final price. Call (833) 954-6131 for an exact quote, estimates are free.
| Service | Typical Estimated Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Roof Repair | $400 – $1,800 |
For a full kitchen remodel that touches window openings, expect $14,000 – $45,000; cabinet installation runs $4,000 – $13,000 and countertop installation $2,000 – $6,500. A fogged IGU re-glaze is a fraction of a full window replacement, which is why we price repair and replace separately in the same written estimate.
Book Your PGT Service in Burbank, CA
If a PGT window is fogging, a sliding patio door is dragging, or a roof repair may touch your WinGuard® glass, call Construction Burbank at (833) 954-6131. We’ll diagnose the unit, put a written estimate in front of you, and hold the price once you approve it. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free.
Written by the team at Construction Burbank.