Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Burbank Homeowners Choose Jerith Construction
We provide independent Jerith fence and gate construction service in Burbank: installation, repair, and retrofit of Jerith ornamental aluminum and vinyl systems, including gate repair and post reset work. What sets our Jerith work apart is site knowledge. We’ve installed and repaired these fences across the older ranch-style and hillside properties around Burbank, so we know the specific issues – expansive clay soils, UV-faded powder coat, and gate-sag patterns – that come with aging Jerith installs in this city. We are not Jerith-authorized and have no affiliation with the manufacturer. We’re a local crew that has spent years solving the fence and gate problems Jerith owners in Burbank face. Call (833) 954-6131 to schedule a free estimate.
Why Trust Construction Burbank for Your Jerith Construction?
Jerith builds ornamental aluminum and vinyl fencing, and the systems hold up well when they’re installed and serviced with the right parts. The difference between a repair that lasts and one that fails again inside a year usually comes down to whether the hardware, pickets, and rails match the original profile and finish. Our technicians have up to 15 years of experience with exactly this kind of work, and they know how Jerith aluminum panels, gates, and vinyl runs are put together – where the rivets seat, how the rail-to-post brackets load, and what a gate frame needs to stay square.
We repair, install, and service Jerith fencing with quality parts that fit it. That means OEM replacement pickets, rails, brackets, and gate hardware where a match matters for color and profile, because aftermarket parts often fit poorly or fade differently. It also means we work in a warranty-safe way: we don’t drill, cut, or modify a Jerith system in ways that would give a manufacturer a reason to deny a claim, and we keep fasteners and finishes consistent with the original build.
Every job starts with a free estimate and a written line-item quote, and that written estimate sets the final price. If you own Jerith fencing in Burbank and want it diagnosed by people who’ve seen the same failures before, call (833) 954-6131. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Jerith Construction Problems We Fix in Burbank
A Jerith fence in Burbank ages in predictable ways, and it helps to know which ones you’re looking at before you decide on a fix.
- Powder-coat chalking and fade on south-facing aluminum pickets. After 8 to 12 years of Burbank sun, the finish on a sun-exposed run can chalk and lose color. The metal underneath is usually still sound. This is a cosmetic problem first and a structural one only if corrosion has started at a scratch or chip.
- Post uplift and gate-frame racking from expansive clay soil. Burbank’s clay swells when it’s wet and shrinks when it dries, and that seasonal movement lifts and tilts fence posts. When a gate post moves, the frame goes out of square and the gate starts to drag. The fence panels are often fine; the footing is the problem.
- Loose or missing picket rivets and weld failures at rail-to-post brackets. On older Jerith Traditional runs, rivets work loose and bracket welds can fail. A single missing rivet looks minor, but it lets the picket rattle and eventually lets it separate from the rail. Catching these early keeps a small repair small.
- Cracked vinyl post caps and bottom rails on Jerith vinyl lines. UV exposure plus heat radiating off nearby walls makes vinyl brittle over time. Post caps and bottom rails are the first to crack because they take direct sun and hold heat. A cracked cap lets water into the post, which is the bigger concern.
- Hinge-point sag and latch misalignment on gate systems. After a post settles, the hinge side drops and the latch stops lining up. People often force the gate, which wears the hinges faster. Re-leveling the frame and replacing worn hardware with OEM Jerith parts typically solves it without touching the rest of the run.
Jerith Parts & Our Repair-vs-Replace Approach
On Jerith aluminum and vinyl fences, OEM replacement pickets, rails, brackets, and gate hardware are the only reliable match for color and profile. Aftermarket parts often fit poorly or fade differently, and a mismatched panel on a visible run is something you’ll notice every time you pull into the driveway. We don’t stock or carry Jerith parts. We source quality parts that fit the system, and we’re upfront about what’s available and what it costs before any work begins.
The repair-or-replace call comes down to the structure. When a run is sound but faded and has a few failed rivets, targeted OEM repair and refinishing is the honest answer. When post footings are heaving or more than a third of the panels are compromised, full replacement is the better long-term spend. We’ll walk you through which situation you’re in and give you a written quote for either path. Call (833) 954-6131 for a free estimate.
Our Jerith Service Process – Step by Step
- 1
Diagnosis. We look at the whole system, not just the failure you called about: finish condition on sun-exposed pickets, rivet and bracket integrity along each run, post plumb, and gate frame square. We check the footing depth on any post that’s moved.
- 2
Repair or install. For repairs, we replace worn hardware and failed rivets with parts that match the Jerith profile, reset heaved posts in deeper concrete footings sized for expansive clay, and re-level gate frames. For installs, we set footings to suit the soil and the panel loads.
- 3
Test. Every gate gets cycled through its full swing, checked for latch alignment and hinge bind, and adjusted until it closes cleanly on its own. Fence panels get a pull test at the brackets to confirm nothing is loose.
- 4
Warranty. We explain what the manufacturer’s warranty covers on the Jerith system and what our workmanship covers, so you know where each responsibility sits.
Jerith Products We Service & Install in Burbank
We work on the kinds of Jerith products that make up most residential installs in Burbank. That includes Jerith Traditional aluminum fence panels, the Westchester aluminum fence series, and the PennHaven vinyl fence collection, along with Titan aluminum ornamental gate systems. We install new runs, repair and retrofit existing ones, and handle gate repair and post reset as standalone work. If you have a Jerith system we haven’t listed, call and describe it – most aluminum and vinyl fence and gate work falls within what we do. We’re an independent provider, not a dealer, and we don’t claim to stock Jerith inventory.
See the difference
Before
After
Before
After
Before
AfterWe Also Service These Brands
Jerith is one part of what we handle. We also work with kitchen and bath brands including KraftMaid cabinetry, Cambria, Silestone, and Kohler fixtures, which means a single contractor relationship can cover fence work and interior remodeling on the same property. If your project stretches beyond the fence line, you don’t need to find a second company to coordinate.
FAQs – Jerith Construction Service in Burbank
No. We are an independent Jerith service provider with no affiliation with or authorization from the manufacturer. We repair, install, and service Jerith fencing with quality parts that fit it, and we’re clear about that distinction on every job.
Usually not. In most cases the gate post has settled or lifted, the frame has racked, and the fix is to reset the post in a deeper footing sized for the local clay, re-level the gate, and replace worn hinges and the latch with OEM Jerith hardware. A typical job goes like this: a Burbank owner notices the gate dragging and the latch no longer catching after a rainy winter. The panels are still solid, but the gate post has lifted and tilted because the original footing is too shallow for expansive soil. A qualified local pro pulls and re-sets the post, re-levels the frame, and swaps the hardware rather than tearing out the run. Call (833) 954-6131 for an exact quote – estimates are free.
Expect 8 to 12 years on south-facing pickets before chalking and fade show up, given Burbank’s sun. Finish on shaded runs lasts longer. Once it fades, the metal is usually still sound and refinishing is a reasonable option. Call (833) 954-6131 to have your finish assessed.
It depends on how much the existing finish has faded. OEM Jerith parts match the original color and profile, but a decade of sun means a new panel can read slightly brighter against an aged run. We’ll tell you honestly how close the match will be before you commit. Call (833) 954-6131 for a free estimate.
UV exposure combined with heat radiating off nearby walls makes the vinyl brittle, and caps and bottom rails take the most direct sun. A cracked cap also lets water into the post, so it’s worth fixing promptly. Call (833) 954-6131 to schedule a look.
If post footings are heaving and more than a third of the panels are compromised, full replacement is usually the better long-term spend. A sound run with a few failed rivets or faded finish is worth repairing. Call (833) 954-6131 for an exact quote – estimates are free.
Book Your Jerith Service in Burbank, CA
If you own Jerith fencing or a Jerith gate in Burbank and need it diagnosed, repaired, or replaced, call (833) 954-6131. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Every job starts with a free estimate and a written line-item quote, and that estimate sets the final price – no change orders after work begins.
Jerith Fence Pricing in Burbank
These are typical estimated ranges for the two fence types we install most in Burbank. Your written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Aluminum Fence Installation | $4000 – $10000 |
| Vinyl Fence Installation | $3500 – $9000 |
Written by the team at Construction Burbank.