Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Burbank Homeowners Choose Ameristar Construction
Construction Burbank provides independent Ameristar construction service across Burbank: cabinet installation and refacing, roof repair, tile and flooring, fencing, and the finish work that ties a value-tier product into a well-built home. We are not affiliated with, authorized by, or a dealer for Ameristar, and we never claim to be. What sets our Ameristar work apart is familiarity with the specific ways this value-engineered line fails, and what it actually takes to fix those failures correctly the first time on a Burbank house.
Why Trust Construction Burbank for Your Ameristar Construction?
Our technicians have up to 15 years of experience, and a good share of that has been spent on Ameristar products specifically. That history matters with a value-engineered line. The parts are budget-friendly, the installation tolerances are tighter than premium lines, and small shortcuts show up fast. We know which Ameristar components hold up and which ones are the first to go.
When we service Ameristar equipment, we fit it with quality parts that match the product, not whatever happens to be on a shelf. For cabinets, that means proper hinge plates, inserts, and glides that fit the existing frame. For roofing, it means panels and fasteners that match the installed profile and color, verified before anything is ordered. For fences, it means posts and hardware that carry the gate load the original hardware was too light to carry.
We also work warranty-safe. We don’t do anything that undermines an active manufacturer warranty on your Ameristar product, and we’ll tell you plainly if a repair approach would jeopardize coverage before we start. If a fix is better handled as a warranty claim, we say so. That’s the difference between an independent shop with real Ameristar experience and one that just says yes.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Ameristar Construction Problems We Fix in Burbank
These are the failures we run into most often with Ameristar products in Burbank. They aren’t unique to any one install, but they show up in consistent patterns.
- Cabinet hinge screws stripping out of particleboard frames. Ameristar cabinet doors are light, which means the hinge screws take repeated load every time the door opens, and over time the screw holes in the particleboard frame wallow out. Once the screws won’t bite, the door sags and drags on the adjacent door. The fix is inserts or a relocated hinge plate, not a whole new door.
- Thermofoil and laminate door faces peeling at edges. Near a sink, a dishwasher, or a heavily used prep area, moisture wicks under the laminate edge and the face lifts. In Burbank’s dry summers and cooler, damper winters, that seasonal swing stresses the adhesive. Caught early, an edge can be re-glued and sealed. Caught late, the door needs replacing.
- Stone-coated steel roofing with fastener back-out at valleys and cut edges. Ameristar stone-coated steel panels expand and contract with the temperature swings between a 100°F-plus Burbank summer and a cool winter night. Fasteners at valleys, hips, and cut edges are the first to work loose. Loose fasteners let the panel lift, and the granules at the cut edges wear faster than the field of the panel.
- Vinyl and composite fence posts sagging or cracking at the gate. Gate hinges on an Ameristar vinyl fence concentrate all the gate’s weight on the post. Over a few seasons, thermal movement plus soil settling causes the post to lean or the hinge area to crack. A reinforced post and heavier hinges solve it for good.
- Entry and storm door hardware and weatherstrip wear. Ameristar entry and storm door series hold up reasonably well, but the weatherstrip, closer, and latch hardware wear out first. That shows up as a draft, a door that doesn’t latch cleanly, or a closer that slams. Hardware swap is usually all that’s needed.
A typical Ameristar cabinet job usually starts with a homeowner noticing a kitchen door hanging crooked or thermofoil peeling near the dishwasher. The cause is almost always stripped hinge screws in the particleboard frame or moisture getting under the laminate edge. A qualified pro pulls the door, repairs or relocates the hinge plate with proper inserts, and replaces failed glides or door faces with matching stock. On the roof side, an Ameristar stone-coated steel roof with lifted fasteners at a valley gets re-secured and sealed rather than fully replaced if the panels and underlayment are otherwise sound.
Ameristar Parts & Our Repair-vs-Replace Approach
Parts choice on an Ameristar product is where the money and the longevity live. For cabinets, the OEM hinges and drawer glides are inexpensive and genuinely worth ordering, because a $6 glide that fits beats a $30 glide you have to shim. We don’t claim to stock OEM or genuine Ameristar parts; we order the correct parts for the specific product and install them properly. For roofing, we use matching OEM panels or profile-correct aftermarket pieces only when the color and profile match has been verified in person. For fences, we match post and hardware to the load.
Repair vs replace comes down to how far the failure has spread and whether the underlayment or frame is still sound. On cabinets and fences, repair is usually the right call: the structure is intact and the failing component is a hinge, a face, a post, or a hinge plate. On roofing, the math flips fast. If more than a few panels are compromised or the underlayment is failing, we’ll tell you a replacement is the honest answer rather than a patch that fails in another season.
Call (833) 954-6131 to talk through your Ameristar repair or install. Estimates are free.
Our Ameristar Service Process – Step by Step
- 1
Diagnosis. We get eyes on the actual failure: which hinge holes are stripped, how far the thermofoil has peeled, which roofing fasteners are backed out, which fence posts have moved. On a roof, we check the underlayment condition and whether the panel edges show granule loss. This is what makes the difference between a repair that holds and a repair that fails again.
- 2
Repair or install. We use quality parts that fit the Ameristar product, installed to spec. On cabinets, hinge plates are relocated and set with inserts. On roofing, panels are re-secured and sealed, or replaced with matching stock. On fences, posts and hardware are upgraded to carry the load.
- 3
Test. Cabinet doors open, close, and latch flush. Roof panels are checked at the seams and fasteners. Fence gates swing clean and latch under their own weight. Storm door closers cycle through a full range.
- 4
Warranty. We leave the manufacturer warranty intact wherever possible and explain what’s covered after the work is done. Any manufacturer-backed warranty (for example, standard Ameristar cabinet hardware coverage) stays with the product, and our workmanship sits on top of it.
See the difference
Before
After
Before
After
Before
AfterAmeristar Products We Service & Install in Burbank
We service and install the Ameristar product families that show up in Burbank’s 1920s-to-1950s Spanish Colonial and Craftsman housing stock and its post-war ranch remodels. That covers Ameristar cabinet lines sold through big-box channels, including value-tier shaker and slab door styles that need repair or refacing. It also covers Ameristar stone-coated steel and asphalt shingle roofing on homes in Magnolia Park, the Rancho districts, and the Verdugo foothill edges where fire-resistant detailing matters. We handle Ameristar composite and vinyl fencing systems, and Ameristar entry and storm door series. We don’t claim to stock any of these; we assess the product, order what fits, and install it properly.
We Also Service These Brands
We’re not tied to a single brand, and Burbank kitchens and bathrooms often mix products across categories. That’s fine by us. When a project calls for KraftMaid or Kilcher-quality cabinetry, Cambria, Silestone, or Caesarstone surfaces, or Kohler, Moen, or Toto fixtures, we work with those lines as readily as with Ameristar. One contractor can carry a Burbank remodel from cabinet hinges to countertop, without you having to find a second shop for every layer.
FAQs – Ameristar Construction Service in Burbank
No. We are an independent Ameristar service provider. We are not affiliated with, authorized by, or a dealer for Ameristar, and we never claim to be. We service and install Ameristar products using quality parts that fit them, and we fit them correctly for Burbank homes.
In most cases they can be refaced or the affected door faces replaced without new cabinets. Thermofoil and laminate peeling near a sink or dishwasher is usually moisture wicking under the laminate edge, not a failure of the cabinet box. A pro removes the failed door, re-glues or replaces the face with matching stock, and re-seals the edge to stop repeat lifting. Full cabinet replacement is usually only needed when the frame itself is water-damaged. Call (833) 954-6131 for an exact quote; estimates are free.
You can repair it if the panels and underlayment are otherwise sound and only a few fasteners have backed out around valleys or cut edges. If more than a few panels are compromised or the underlayment is failing, replacement is the honest answer. A pro checks panel condition, edge granule loss, and underlayment during an on-site assessment. Call (833) 954-6131 to schedule a free estimate in Burbank.
Yes, the gate posts in particular can sag over a few seasons as the gate hinges concentrate weight on the post and thermal movement plus soil settling take their toll. The usual fix is to reinforce or replace the gate post and upgrade the hinges to hardware that carries the load. Repair usually beats replacement here, because the fence panels and rails are rarely the failing part. Call (833) 954-6131 for an exact quote on your fence.
Expect a same-day or short scheduled visit that pulls the sagging doors, repairs or relocates the hinge plate with proper inserts, and replaces any failed glides. Most Ameristar cabinet hinge work is straightforward once the hinge holes are addressed correctly; a screw that won’t bite into particleboard is the whole problem. Call (833) 954-6131 for a free estimate.
Yes, if the color and profile match is verified in person before anything is ordered. We use matching OEM panels or profile-correct aftermarket pieces only when the match is confirmed; a mismatched panel is visible from the street and will look worse than the repair it was meant to fix. Call (833) 954-6131 to get your roof assessed and an exact quote.
Typical estimates for the Ameristar work we handle in Burbank run as follows. Ranges are per job and the written estimate sets the final price.
| Service | Typical estimated range |
|---|---|
| Ameristar cabinet installation or refacing | $4,000 – $13,000 |
| Ameristar roof repair | $400 – $1,800 |
| Tile and flooring | Quoted per job |
Call (833) 954-6131 for an exact quote on your Ameristar product; estimates are free.
Cabinet hinge and glide repairs are usually a single visit. Cabinet refacing and installation run longer depending on door count and face finish. Roof repairs are typically one to two visits once panels and fasteners are matched. Fence gate hardware and post reinforcement are usually a single visit. We’ll give you a realistic timeline with the written estimate, not a guess.
Book Your Ameristar Service in Burbank, CA
If you own an Ameristar cabinet, roof, fence, or door and want a straight answer on repair vs replace, call (833) 954-6131. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, the price is set per job by the written estimate, and we treat your Ameristar product like it’s ours.
Written by the team at Construction Burbank.