Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Burbank Homeowners Choose Unilock Construction
We provide independent Unilock construction service in Burbank, CA: paver driveways, patios and hardscape installs and repairs built around the Unilock lines that fit your property. What sets our Unilock work apart is focus. We treat Unilock as a hardscape system, not a generic concrete-and-sand job, and we quote repairs or replacement based on how your base and joint sand are actually performing. That matters in Burbank, where hot valley summers and seasonal rain put pavers through a specific kind of stress. We’re an independent Unilock service provider, not affiliated with or authorized by Unilock, and that independence keeps our advice honest. Call (833) 954-6131 for a free estimate.
Key Takeaways
- We install and repair Unilock paver driveways and patios across Burbank.
- Our recommendations follow the base and joints, not a sales program.
- Typical estimated paver driveway installation in Burbank runs $7,000 – $18,000.
- Free estimates, written line-item quotes, and no change orders once work starts.
Why Trust Construction Burbank for Your Unilock Construction?
Our technicians have up to 15 years of experience with segmental pavers, and that experience shows up in the details that decide whether a Unilock install holds: base compaction, edge restraint and joint sand. We know the Brussels Block, Pinter and Beacon Hill lines and how each one behaves on a Burbank lot, and we match replacement units from the same line and color family so blends stay consistent instead of patchy.
We don’t stock or sell genuine Unilock parts and we’re not a Unilock dealer. What we do is repair, install and service Unilock hardscape using quality materials that fit it, and we follow practices that keep manufacturer warranty coverage intact. That means proper polymeric joint sand instead of cheap substitutes, mechanically anchored edge restraint instead of a thin bead of mortar, and a compacted aggregate base built to depth before a single paver goes down. When a repair is the right answer, we say so. When base failure means a full rebuild is the honest call, we say that too. It’s the same standard whether you’re refreshing a Magnolia Park patio or replacing a worn driveway on a ranch bungalow.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Unilock Construction Problems We Fix in Burbank
Most Unilock hardscape problems in Burbank trace back to three things: water, sun and the edge. Here’s what we see most often.
- Polymeric joint sand washing out. Summer irrigation and winter rain push joint sand out of the gaps, and once it’s gone the pavers start to shift and weed joints open. The fix usually means pulling the affected course, cleaning the joints and re-sanding with proper polymeric sand.
- Edge restraint failure. On driveways and patio perimeters, a weak or missing edge lets pavers creep outward. You’ll notice the border course loosening and spalling first, then the field starting to move behind it.
- Efflorescence and color fading. Lighter tumbled pavers exposed to Burbank’s hard irrigation water and full valley sun can show white mineral bloom and dulled color. Cleaning and sealing help, but the real answer is controlling how water drains across the surface.
- Base failure. A thin or poorly compacted aggregate base under a driveway produces rutting and lippage between units, especially after heavy use and seasonal moisture swings. This is the failure that most often pushes a repair toward replacement.
- Mismatched repairs. When only some units are broken, using the wrong line or color family leaves a visible patch. Matching from the same line keeps the pattern reading as one continuous surface.
Unilock Parts & Our Repair-vs-Replace Approach
Joints and edges are where Unilock installs live or die, so we specify proper polymeric joint sand and mechanically anchored edge restraint rather than cheap substitutes. We match replacement units from the same line and color family so blends stay consistent, and we don’t claim to stock OEM or genuine Unilock parts; we source quality materials that fit the system.
The repair-or-replace decision comes down to the base. If the base is intact and only joints, borders or isolated units have failed, repair is the honest call. If base compaction is the root cause and rutting shows across the field, full replacement is the truthful recommendation. We won’t sell a tear-out to fix a joint problem, and we won’t patch over a base problem that will come back. Call (833) 954-6131 to talk through what your pavers are doing.
Our Unilock Service Process – Step by Step
- 1
Diagnosis. We walk the surface, check joint integrity, inspect the edge restraint and probe the base where it’s exposed, so we know whether the problem is at the joints, the edge or underneath.
- 2
Repair or install. For repairs, we pull the affected course, re-compact and re-grade the base, reset the units to the original pattern and re-anchor the edge. For new installs, we excavate, build and compact the aggregate base, then set the Unilock units to your chosen pattern.
- 3
Re-sanding and finish. We re-sand with polymeric joint sand, wet it in properly and clean the surface so the joints cure even and the color reads consistent.
- 4
Warranty and care. We explain how to keep the surface draining right and what maintenance keeps your Unilock warranty coverage valid, including how to manage irrigation runoff.
See the difference
Before
After
Before
After
Before
AfterUnilock Products We Service & Install in Burbank
We work across the Unilock paver lines that fit residential hardscape: tumbled, chamfered pavers like Brussels Block; rectangular modular pavers like Pinter; irregular flagstone-look pavers like Beacon Hill; and slab or plank-look systems in the Uno and Abbotsford style. We service paver driveways, patios, walkways and pool surrounds, and we handle everything from a single loose course to a full new install. We don’t claim to stock these lines. We help you choose the right material for your Burbank property, then build or repair it correctly so it lasts.
We Also Service These Brands
Unilock is one part of a wider material roster. We work with KraftMaid cabinetry, Cambria and Silestone engineered stone surfaces, and Kohler fixtures, among other trusted brands across our categories. That breadth means one contractor can handle the hardscape outside and the finished interiors inside, so you’re not juggling multiple specialists on one project.
FAQs – Unilock Construction Service in Burbank
No. We’re an independent Unilock service provider, not affiliated with, authorized by or a dealer for Unilock. We install, repair and service Unilock hardscape using quality materials that fit it, and we say plainly what falls under manufacturer warranty versus our own workmanship.
Yes. We specify proper polymeric joint sand and mechanically anchored edge restraint, and we match replacement units from the same line and color family so blends stay consistent. We don’t claim to stock OEM or genuine Unilock parts, but the materials we use are chosen to fit the system and hold up in Burbank’s conditions.
Joint re-sanding and isolated unit replacement can often be done in a day, while a full driveway or patio replacement usually runs several days depending on size and base work. We confirm the timeline in your written estimate before work starts. Call (833) 954-6131 to schedule a free estimate.
We cover pavers in the Brussels Block, Pinter and Beacon Hill lines, plus Uno and Abbotsford style slab and plank systems, for driveways, patios, walkways and pool surrounds. Anything from one loose course to a full new install is in scope.
Properly installed and repaired Unilock hardscape shouldn’t void your coverage, but the details matter, including joint sand, edge restraint and base compaction. We follow practices that keep manufacturer warranty coverage intact and tell you what maintenance keeps it valid.
Typical estimated ranges are below. These are estimates, and the written line-item estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
Call (833) 954-6131 for an exact quote, estimates are free.
Yes, often. If the base is intact and only joints, borders or isolated units have failed, we can pull the affected course, re-compact and re-grade the base, reset the units and re-sand without a full tear-out. When base compaction failure is widespread, replacement becomes the honest answer. Call (833) 954-6131 and we’ll help you tell which situation you have.
Because summer irrigation and winter rain wash polymeric joint sand out of the gaps, and once it’s gone the pavers shift and weeds open the joints further. Proper re-sanding with quality polymeric sand, plus controlling how water drains across the surface, keeps it in place longer.
The edge matters more than most homeowners realize. A weak or missing edge restraint lets pavers creep outward, which is where border-course spalling and field movement start. We anchor the edge mechanically so the field stays put.
Yes, we match replacement units from the same line and color family so the blend stays consistent. That’s exactly why using the right line matters on a partial repair rather than a generic paver that reads as a patch.
It comes down to the base. If joints and isolated units have failed but the base is sound, a new base and re-sand can restore it. If rutting and lippage show across the field, the base itself has failed and replacement is the truthful recommendation. Call (833) 954-6131 for a free estimate to sort it out.
Book Your Unilock Service in Burbank, CA
Whether your Brussels Block patio needs re-sanding or your Pinter driveway is ready for replacement, we’ll give you a straight answer and a written line-item estimate before any work begins. Call (833) 954-6131. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free.
Written by the team at Construction Burbank.