Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Burbank Homeowners Choose Belgard Construction
We provide independent Belgard construction service in Burbank, CA: paver driveways, paver patios, driveway replacement, retaining walls, and the base work underneath all of it. What sets our Belgard work apart is preparation and drainage, not just the surface look. We’re an independent installer and service provider. We are not affiliated with, authorized by, or certified by Belgard, and we don’t claim any Belgard warranty program. If your Belgard units are heaving, your joints are washing out, or a wall is starting to lean, call (833) 954-6131. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Construction Burbank for Your Belgard Construction?
We work on Belgard hardscape systems constantly. Pavers, retaining wall blocks, and the aggregate base and drainage that make them last. That repetition is why we can read a failing driveway in Burbank and tell you what went wrong underneath it rather than guessing at the surface.
Our technicians have up to 15 years of experience with segmental pavers and wall systems, and they know how Belgard units behave in real conditions: east San Fernando Valley heat that pushes past 100°F in summer, dry Santa Ana air in fall, and clay-heavy soil that holds water in the wrong places. We use quality parts and materials that fit the system, including genuine Belgard units and matching accessories when a repair needs to blend into an existing field.
Warranty-safe practice matters here. Manufacturer coverage on pavers and wall systems usually depends on proper base preparation, compaction, and drainage. When we rebuild a failing section, we do it in a way that respects those requirements so you’re not creating a coverage problem. Patching a sunken field with a thin skim of sand is faster and cheaper and it fails again in a season or two. We don’t do it. Call (833) 954-6131 for a free estimate with a written line-item quote.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Belgard Construction Problems We Fix in Burbank
- Uneven settling and lippage on Lafitt and Catalina fields. Belgard Lafitt Rustic Slab and Catalina Grana pavers installed over a base that’s too thin or under-compacted settle at different rates. The result is lippage: one unit sitting proud of its neighbor, creating trip edges. In Burbank this usually shows within a few seasons, sometimes sooner on a driveway taking daily vehicle load.
- Efflorescence, the white chalky bloom. That white mineral film on concrete pavers is common where water ponds and drainage was never cut into the base. It’s a symptom, not a stain problem. Treating the surface without fixing where the water sits means it comes back with the next wet season.
- Polymeric sand joints washing out or cracking. Burbank’s dry summer heat and the occasional hard rain work on joint sand differently than a mild climate does. Joints crack, sand washes out, and then weeds and ant trails open up between units. Weak joint sand is often the first thing to fail on an otherwise sound patio.
- Weston Stone wall courses bulging or leaning. Belgard Weston Stone retaining wall blocks lean when the installer skipped geogrid reinforcement or sized the drainage gravel and weep points wrong on a slope. Retaining walls near the Verdugo foothills and Stough Canyon edges carry real load, and a wall that’s moving is a structural question, not a cosmetic one.
- Heaved sections after root growth or a hard rain. Tree roots and saturated clay push units up out of plane. A single heaved patch doesn’t mean the whole driveway is finished, but it does mean the base and drainage need a look.
A Belgard paver driveway or patio typically starts showing problems as sunken, rocking units and sand joints that wash out after a few dry seasons. Almost always the cause is a base that was under-compacted or too thin, with water that had nowhere to go. A qualified hardscape pro pulls the affected field, checks and rebuilds the aggregate base in lifts, re-cuts slope and drainage, then re-lays and re-sands with fresh polymeric joint sand. Sometimes the Belgard units that are still sound get reused.
Belgard Parts & Our Repair-vs-Replace Approach
We use genuine Belgard units and matching accessories when a repair needs to blend with an existing field, and quality aftermarket base aggregates, geotextile, and polymeric sand where those perform as well or better. We don’t stock OEM parts and we don’t claim to be a Belgard dealer. What we do is source materials that fit the system and hold up in this climate.
Repair versus replace comes down to how much of the field has failed and why. If a small section of pavers has heaved, re-laying and re-sanding that section is almost always smarter than tearing out an entire driveway or patio. If the base is failing across the whole field, or drainage was never right to begin with, patching just moves the problem. We tell you which one you have, in plain terms, with the estimate in writing. Call (833) 954-6131 and we’ll take a look. Estimates are free.
Our Belgard Service Process – Step by Step
- 1
Diagnosis. We walk the Belgard field or wall, check for lippage, probe the base depth, look at where water goes, and find the efflorescence pattern that tells us where it ponds. For a wall, we check for geogrid and the weep points.
- 2
Repair or installation plan. You get a written line-item estimate covering base prep, drainage, materials, and joint sand. For a new paver driveway or paver patio, this is where we size the base and confirm the slope before anything comes out of the ground.
- 3
The work. Excavation, aggregate base built in compacted lifts, drainage cut in, then Belgard units laid to string line and slope. Wall courses get geogrid where load requires it, with drainage gravel and weep points sized correctly.
- 4
Joint sand and clean-up. Fresh polymeric sand worked into the joints, compacted, and cured to spec so it holds through Burbank’s dry summer heat.
- 5
Final check. We walk the finished work with you, confirm the drainage runs where it should, and explain what maintenance the system needs to keep its coverage. Our workmanship warranty terms go in writing.
See the difference
Before
After
Before
After
Before
AfterBelgard Products We Service & Install in Burbank
We service and install Belgard hardscape systems across Burbank: paver driveways, paver patios, walkways, pool decks, and segmental retaining walls. That includes Belgard Lafitt Rustic Slab pavers, Catalina Grana pavers, Urbana Stone pavers, and Weston Stone retaining wall systems. We also handle repairs to existing installations, joint sand replacement, section re-lays, base rebuilds, and wall stabilization where geogrid or drainage was missed.
Driveway replacement is one of our most common Belgard projects in Burbank, often on older properties where a post-war concrete apron has cracked or settled and a segmental paver surface is the better long-term answer. Paver patio installation comes close behind, especially on homes where outdoor space needs to handle real summer heat.
We Also Service These Brands
Belgard is one brand in a wider roster. We also work with KraftMaid cabinetry, Cambria and Silestone engineered stone, and Kohler fixtures, which means a hardscape project can sit alongside a kitchen or bath remodel under one contractor relationship. One contractor, every project phase. If your project touches more than the driveway, you don’t need to line up a second company.
FAQs – Belgard Construction Service in Burbank
No. We are an independent Belgard service provider. We aren’t affiliated with, authorized by, or certified by Belgard, and we don’t represent their warranty program. We install and repair Belgard products, and we tell you plainly what that means for your coverage.
Yes. We use genuine Belgard units and matching accessories when a repair needs to blend with an existing field, and quality aftermarket base aggregates, geotextile, and polymeric sand where they perform as well or better. We don’t stock OEM parts or claim to be a dealer; we source what fits the system and holds up in Burbank.
A section re-lay and re-sand on a paver field is often a day or two. A full paver driveway installation or driveway replacement runs longer, and a retaining wall rebuild depends on slope and drainage. The written estimate sets the timeline for your specific job.
Paver driveways, paver patios, walkways, pool decks, and segmental retaining walls, including Lafitt Rustic Slab, Catalina Grana, and Urbana Stone pavers and Weston Stone wall blocks. Call (833) 954-6131 to confirm coverage for your specific installation.
It can if the work doesn’t respect the manufacturer’s requirements for base prep and drainage. That’s why we rebuild bases properly rather than patching over a failing one. We’re independent and don’t administer any Belgard warranty, so check your coverage with the manufacturer before work starts.
Typical estimated ranges in Burbank are below. These are estimates, and the written estimate sets the final price.
| Project | Typical Estimated Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
Call (833) 954-6131 for an exact quote. Estimates are free, and we put everything in writing with no change orders.
It depends on the scope. Most cities require permits for structural retaining walls, driveway approaches, and drainage changes, while a simple surface replacement may not. Ask Burbank’s building department for your address, and we can pull permits and handle inspections where the job needs them. Call (833) 954-6131 to talk through your project.
Concrete pavers may soften slightly in tone over years of intense sun, but genuine fade is uncommon. What looks like fading is more often efflorescence or dirt trapped in worn joint sand. Re-sanding and a proper clean usually restores the look.
Sometimes, but new units won’t match weathered units exactly. We order genuine Belgard units that fit your existing line and set realistic expectations about tone variation before you commit. A blended layout often looks more natural than a hard patch. Call (833) 954-6131 to look at the options.
Efflorescence: mineral salts migrating to the surface where water sits in the base. It’s a drainage symptom, not a surface stain. Fixing where the water ponds is the real answer, and cleaning alone brings it back.
Usually, yes, for a long-term property. Pavers handle movement with clay soil better than poured slab, individual units can be pulled and reset, and the base work that goes under them is where the durability comes from. Concrete costs less up front. Call (833) 954-6131 for an estimate on your Burbank driveway.
Book Your Belgard Service in Burbank, CA
Paver driveway, paver patio, driveway replacement, or a wall that’s starting to lean? We’ll diagnose what’s actually failing and give you a written line-item estimate for the fix. Licensed and insured, free estimates, permits pulled and inspections passed where the job requires them. Call (833) 954-6131. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Burbank.