Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Countertop Installation Cost in Burbank?
Countertop installation in Burbank typically runs $2,000 to $6,500 per project, depending on the material you choose, the square footage of your counters, and how much cutting and fitting the job needs. A standard run with a mid-range engineered quartz or a quality laminate lands closer to the lower end, while a large kitchen in Cambria natural quartz or a thick-edged Caesarstone slab pushes toward the higher figure. These are typical estimates for the Burbank market in 2026, and the free written estimate we provide sets the final price.
We’re Construction Burbank, and countertops are one piece of a full-property approach to residential construction. We help you choose the right material, not just any material, matching your kitchen’s function, budget and design to engineered stone surfaces from Cambria, Silestone and Caesarstone. One contractor, every project phase, from the driveway to the roofline.
Key Takeaways
- Typical countertop installation in Burbank: $2,000 – $6,500.
- Backsplashes add $800 – $2,500 if you run tile (or another material) up the wall.
- Material choice and square footage drive the biggest swings in price.
- Cutouts, edge profiles and overhang all affect the total more than most homeowners expect.
- Free estimates, upfront pricing, and a satisfaction guarantee back every job.
Countertop Installation Cost Breakdown (2026)
Here’s how the numbers stack up for a countertop project in Burbank. The ranges below are estimates for the work itself, and a written estimate will itemize your specific layout before anything is ordered.
| Line item | Typical estimated range |
|---|---|
| Full countertop installation (materials and labor) | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Cabinet installation (if counters need a new base) | $4,000 – $13,000 |
| Kitchen island installation | $3,000 – $10,000 |
| Full kitchen remodel (counters included) | $14,000 – $45,000 |
| Small kitchen remodel (counters included) | $9,000 – $20,000 |
What pushes you up or down within the $2,000 – $6,500 range? Material is the biggest lever. An engineered quartz in a common color sits in the middle; a large, matched-set natural quartz slab with a thick mitered edge sits near the top. Layout matters just as much: a galley kitchen with a straight run and one sink cutout is straightforward, while an L-shaped or island layout means more seams, more fitting, and often more waste from cutting around corners. A project that also needs new cabinets to support the counter moves into cabinet installation territory, and that’s where a simple finish swap can turn into a bigger remodel. If you’re planning a broader refresh, it makes sense to price your countertop installation alongside the cabinet and backsplash scope so the pieces line up.
What Affects Countertop Installation Pricing in Burbank
Six factors move the number most, and they interact. Understanding them before you book an estimate keeps you from being surprised later.
- Material type. Laminate, solid surface, and engineered quartz sit at different price points. Engineered stone from Cambria, Silestone and Caesarstone is the reliable middle; natural stone and thicker profiles cost more. The material you choose is the single largest line on the estimate.
- Square footage and layout. A small galley kitchen in a Burbank hillside bungalow has less counter than a newer build with a large island, and that difference in square footage is often the biggest driver. More corners mean more seams and more fitting time.
- Edge profile and thickness. A standard eased edge is the baseline. Bullnose, bevel, and mitered edges take more cutting and finishing. Mitered edges on a thick quartz slab make a counter look substantial but push labor and material waste up.
- Cutouts and holes. Every sink, faucet and cooktop cutout adds a step. A single undermount sink and a standard faucet is a modest addition; a double sink, a pot filler, and a cooktop cutout add up. Fixtures from Kohler, Moen, Toto, Grohe, Blanco and Delta are all matched to the cutout, and getting the hole right matters for the finish.
- Removal and hauling. Old counters have to come out and get hauled off. A single-layer laminate pops up quickly; tile counters with a heavy mortar bed take longer and cost more to remove and dispose of.
- Access and building characteristics. Burbank has a lot of period housing stock with character but also with tight doorways and stairs. A slab that has to be carried up a narrow staircase or through a tight hallway adds handling time; a ground-floor kitchen with a wide side gate keeps it simple.
We help you weigh these tradeoffs as part of selecting from our engineered stone surfaces. If the counter job is the first sketch of a larger remodel, our Construction Burbank team can scope the full property so the counter, cabinets and backsplash all land in one coordinated plan.
Why Choosing the Right Material Matters
Countertops take more daily punishment than almost any surface in the house: hot pans, wet glasses, knife slips, and the occasional dropped jar. Cambria, Silestone and Caesarstone are engineered quartz surfaces with consistent color and low porosity, which makes them a dependable pick for busy kitchens. Natural quartz with varied veining is more of a design piece. Which one is right for your kitchen depends on your cooking habits and your visual taste. We help you match surface to daily use rather than sell you the most expensive slab in the catalog. Built to last, chosen for a reason.
How to Save on Countertop Installation
Every dollar saved on a countertop generally comes from a clearer plan, not a cheaper material. A few practical ways to keep the number closer to the low end of the range:
- Consolidate projects. If you’re already replacing cabinets, coordinate counter installation with the cabinet work so the counter is measured and set in one pass. Doing kitchen remodeling and counter installation separately tends to mean a second mobilization and possible rework.
- Choose a common quartz color. Unusual veining and specialty slabs cost more because of waste. A standard Cambria, Silestone or Caesarstone color keeps the material line in check.
- Keep the layout straightforward. Straight runs with fewer corner seams cost less than complex L-shapes and multiple islands. If a redesign is in the air, plan the layout to minimize cuts.
- Do the backsplash in one material. Running the same slab or a single tile to the upper cabinets is usually simpler and cheaper than mixing several finishes. A backsplash installation priced with the counter saves a second trip.
- Get a free written estimate first. The number we give you is itemized, and the written estimate sets the final price so you know exactly what you’re paying before anything is ordered. Call (833) 954-6131 for a free estimate.
How Countertop Installation Actually Goes
A countertop job normally starts with templating: we measure the exact counter geometry after the cabinets are set, then the slab is fabricated to that template. When the slab arrives, it’s set in place, the seams are joined, cutouts are finished, and the edge profile is polished. The timing depends on fabrication lead time and material, but the key is measuring once, after the base is right, so the slab fits cleanly. If the kitchen is being remodeled at the same time, coordinating counter templating with cabinet installation avoids the common problem of a slab that doesn’t line up because the cabinets settled or shifted.
How Does Countertop Installation Compare to a Full Kitchen Remodel?
A countertop install in Burbank typically runs $2,000 – $6,500 on its own, while a full kitchen remodel is $14,000 – $45,000 and a small kitchen remodel is $9,000 – $20,000. The difference is scope: a counter job replaces one surface, while a remodel touches cabinets, the island, backsplash, sometimes electrical and plumbing. If you’re weighing whether to replace the counters now or wait for a larger remodel, the honest answer is that the counter is usually the last item installed in a remodel because it sits on top of the cabinets. Replacing counters first and remodeling later can mean buying twice. Our team can help you stage it so the counter money isn’t wasted. Call (833) 954-6131 to talk through which path fits your kitchen.
Can You Add a New Backsplash and Island at the Same Time?
Yes, and doing so in one project usually costs less than two separate jobs. A backsplash installation runs $800 – $2,500, and a kitchen island installation runs $3,000 – $10,000, so bundling them with the counter install is a common way Burbank homeowners get the finished look without paying for three separate mobilizations. We can quote the counter, backsplash and island together in one written estimate, and coordinate the subs so the sequencing is right. That’s part of how we keep one contractor relationship across the whole kitchen rather than several.
FAQs – Countertop Installation Cost
How much does countertop installation cost in Burbank?
Typically $2,000 – $6,500 for the project, depending on material, square footage and layout. Engineered quartz from Cambria, Silestone or Caesarstone usually lands mid-range, while natural stone and elaborate edges push higher. Call (833) 954-6131 for an exact free estimate based on your kitchen.
Is it cheaper to repair or replace a countertop?
Replacing is usually the better value when the surface is cracked, delaminating or worn through. A small repair can run a few hundred dollars, but once damage spreads, the repair often doesn’t last and the replacement cost is the only real answer. If your counter is sound but you want a new look, we can talk through whether a refurbish or a full install fits. Call (833) 954-6131 for advice before you commit to a repair.
Can you install a countertop the same day?
Not usually, because engineered stone and natural stone are fabricated to a template after measurement, and fabrication takes time. We move fast on installation once the slab is ready, and we’ll give you a clear timeframe up front. We answer 24/7 at (833) 954-6131, with fast dispatch from 7am to 7pm, Sunday through Friday.
How much does a quartz countertop for a standard kitchen cost in Burbank?
A standard kitchen in quartz typically lands in the $2,000 – $6,500 range, with the exact figure set by square footage, cutouts and edge profile. Cambria, Silestone and Caesarstone engineered quartz are common choices, and the written estimate we provide sets the final price. Call (833) 954-6131 for a free estimate.
Do I need a permit for countertop installation in Burbank?
Most countertop replacements don’t require a permit on their own, but a remodel that moves plumbing, gas or electrical often does. Check with the City of Burbank’s building department for anything beyond a straight surface replacement, and ask us and we’ll walk through what the project stage requires. Call (833) 954-6131 to discuss your scope before booking.
What Else Should Burbank Homeowners Know Before Replacing Counters?
Burbank’s housing mix includes older homes with original tile counters that need careful removal and newer builds with open-plan kitchens that call for a large island surface. The climate is mild, which means counter surfaces aren’t exposed to extreme seasonal swings, but kitchens here still see heavy daily use and occasional heat from cooking. A surface that handles heat and moisture well, matched to an edge that can take a bump, holds up better over time. We help you pick from a curated brand roster so your counter, cabinets and fixtures work as one system. If the project grows into cabinets or a full remodel, we handle that under the same contractor relationship, so you’re not coordinating multiple crews.
Get a Free Countertop Installation Estimate in Burbank
Replacing a counter is a small surface with a big effect on how a kitchen looks and works. Our technicians have up to 15 years of experience, we offer free estimates, upfront pricing and a satisfaction guarantee, and you get one contractor relationship across the whole project. We help you choose the right material, not just any material, matching your kitchen to Cambria, Silestone, Caesarstone and the fixtures that finish the job. Call (833) 954-6131 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday.
Pricing reflects the Burbank market as of 2026. Construction Burbank offers free estimates – call (833) 954-6131.
Written by the team at Construction Burbank.
What Our Customers Say
"Ground up build. Permits, foundation, framing, all of it, and he ran the schedule tightly enough that the subs were never tripping over each other. Finished within a month of a fourteen month estimate."
- Jodi Parker"Quoted me over the phone, charged me that, left. Perfect."
- Javier Guzman"Allowances in the contract were realistic rather than artificially low to make the bid look good."
- Craig Miller